A matt non-reflective finish produced by cold rolling followed by annealing and descaling. The dull finish may result from the picking operation or rolling on dull rolls.
доступный в 304/409.
A bright, moderately reflective cold rolled with the annealed and descaled coil receiving a final light pass through polished rolls. 2B is the most commonly used surface finish.
доступный в 304/430/201/409/410/316.
A bright annealed finished approaches a mirror-like appearance. The final appearance is developed by a single light skin pass through a cold mill over highly polished rolls. Typically uses include appliance components, cookware, food processing equipment.
доступный в 304/430/201/410.
NO.4/NO.3 finished is a general purpose polished finish widely used for restaurant equipment, ship fronts and dairy equipment. Following initial grinding with coarse abrasives, final finishing generally is done with abrasives having a particle size of approximately 120 to 150 mesh.
доступный в 304/430/201/316.
NO.8 finish, the most reflective finish that is commonly produced on sheet, is obtained by polishing with successfully finer abrasives and buffing extensively with very fine buffing rouges. NO.8 is most widely used for architectural parts, small mirrors and reflectors and for press plates.
доступный в 304/201.
Condition and finish commonly preferred fir corrosion resisting and most heat resisting applications. NO.1 is commonly used for raised angular rolled onto the surface to provide skid resistance.
доступный в 304/430/201/410/316.
It's a semi-dull finish with uniform grain, which is obtained using finer abrasives than No.4/NO.5/NO.6. This finish has smooth, soft and exquisite grains which has a low level of reflectivity and unidirectional texture.
доступный в 304/430/201/316.
Hairline is a two-step abrasive polished finish with superior matching characteristics. It’s designed for architectural applications. It boasts a more linear appearance than traditional #4 polish, which means it lends itself to repair and blending in the field. #6 Hairline is suitable for coping, trim, elevator cabs, and more. Can be coated with anti-fingerprint coating for interior use.
доступный в 304/430/201/316.
| Разряд | Отделка | Толщина(mm) | Диапазон ширины (мм) | |||
| 1000 | 1219 | 1250 | 1524 | |||
| 430 | 2B | 0.3 - 3.0 |  |
|
|
|
| BA | 0.3 - 2.0 | |
|
|
||
| HL/NO.4/SB | 0.3 - 3.0 | |
|
|
||
| 304 | No.1 | 2.5 - 12.0 | |
|
|
|
| 2B | 0.3 - 3.0 | |
|
|
|
|
| BA | 0.3 - 1.5 | |
|
|
||
| HL/NO.4/SB | 0.3 - 3.0 | |
|
|
|
|
| 316L | No.1 | 3.0 - 12 | |
|
||
| 2B | 0.5 - 3.0 | |
|
|||
| 201 (Ni >1%) | No.1 | 2.5 - 6.0 | |
|
|
|
| 2B | 0.3 - 3.0 | |
|
|
|
|
| BA | 0.3 - 1.5 | |
||||
| Толщина (мм) | Ширина (мм) | Длина (мм) | Полиэтиленовое покрытие | Намотка бумажной полосы между витками рулонов |
| CR 0.3 ~ 3.0 | 1000 | 2000 | |
|
| 1219 | 2438 | |
|
|
| 1250 | 2500 | |
|
|
| 1500 | 3000 | |
|
|
| 1524 | 3048 | |
|
|
| HR 3.0 ~ 6.0 | 1000 | 2000 | ||
| 1219 | 2438 | |||
| 1250 | 2500 | |||
| 1500 | 3000 | |||
| 1524 | 3048 | |||
| HR 8.0 ~ 50.0 | 1219 | 2438 | ||
| 1500 | 3000 | |||
| 1524 | 3048 |
| Толщина (мм) | Минимальная ширина (мм) | Толщина (мм) | Минимальная ширина (мм) |
| 0.3 | 10 | CR 1.5 | 35 |
| 0.4 | 10 | CR 1.8 | 35 |
| 0.5 | 10 | CR 2.0 | 35 |
| 0.6 | 10 | CR 2.5/HR 2.5 | 35 |
| 0.7 | 10 | CR 3.0/HR 3.0 | 35 |
| 0.8 | 10 | HR 4.0 | 35 |
| 0.9 | 10 | HR 4.5 | 35 |
| 1.0 | 10 | HR 5.0 | 50 |
| 1.2 | 35 | HR 6.0 | 50 |
Упаковки рулонов компании S-More хорошо защищены водонепроницаемым покрытием и P.P. пластинами. Намотка бумажной полосы между каждым витком или защитной пленки рулона , обеспечивает 100% сухость состояние.
Листы нержавеющей стали уложены пластами на деревянные грузовые поддоны и накрыты водонепроницаемыми пластинами. Бумажная прокладка между каждым пластом витком или защитной пленки рулона , обеспечивает 100% сухость.
Полоски из нержавеющей стали, изготовленные по индивидуальным заказам, крепятся при помощи стальных лент. Возможна как горизонтальная, так и вертикальная упаковка. Внутренний диаметр может варьироваться между 300 и 508 мм согласно пожеланиям клиента.
